Job Title
Operating EngineerJob Description Summary
Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned propertiesJob Description
IMPORTANT EDUCATION
High School Diploma of GED Equivalent
Graduate of apprentice program or trade school preferred
IMPORTANT EXPERIENCE
3+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting
ESSENTIAL FUNCTIONS AND RESPONSIBILITIES
Perform all plumbing, electrical, or HVAC requirements of the building(s)
Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
Verify field conditions and perform any necessary repairs or adjustments
Monitor Energy Management
Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.
Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
Document and report activities to supervisor
Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
Complete all required C&W Safety Training as scheduled annually
Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours
ADDITIONAL ELIGIBILITY QUALIFICATIONS
Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)
May be required to have certification as a Universal Technician for CFC’s depending on market licensure requirements
Possess and maintain a valid driver’s license and good driving record with periodic checks (where applicable)
Basic Computing Skills in Outlook, Excel & Word
Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
Knowledgeable in energy management systems, techniques and operations.
Thorough knowledge in all building systems operations, maintenance and repair
May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties
WORK ENVIRONMENT
This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Must have ability to frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
Involves movement between departments, floors, and properties to facilitate work
Ability to read and understand information presented orally and in writing
Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics
OTHER DUTIES
This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.
In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.
INCO: “Cushman & Wakefield”If an employer mentions a salary or salary range on their job, we display it as an "Employer Estimate". If a job has no salary data, Rise displays an estimate if available.
As an Operating Engineer at Cushman & Wakefield in Houston, Texas, your role will be pivotal in ensuring the smooth operation and maintenance of our mechanical, electrical, and plumbing systems. You'll be responsible for creating a safe and efficient working environment across assigned properties. Your daily tasks will range from conducting routine assessments and preventive maintenance to making necessary repairs on a wide variety of equipment such as heating units, chillers, and pumping systems. We’re looking for someone who can perform routine checks on safety systems, troubleshoot issues as they arise, and respond to emergencies with confidence. Your expertise will not only keep our facilities safe and efficient but also contribute to energy management initiatives. You’ll collaborate with a fantastic team, ensuring the highest standards of service and operational excellence. Your background should ideally include at least three years of relevant experience in a commercial setting, alongside a solid understanding of HVAC systems, plumbing, and electrical maintenance. A high school diploma or GED is mandatory, and certifications like a Universal Technician for CFCs or a Journeyman Electrician License are a big plus. If you have a proactive attitude, a knack for problem-solving, and enjoy working in a dynamic atmosphere, Cushman & Wakefield is the place where you can truly thrive. We are excited to welcome new talent to our team, so if you think this sounds like you, let’s keep the conversation going!
C&W Services seeks an experienced Receptionist to be the welcoming face of the organization, facilitating front office operations in a dynamic environment.
Join Cushman & Wakefield as a Performance and Reporting Manager to lead data analysis and client reporting initiatives in a globally recognized real estate services firm.
Join Northwestern Medicine as an Anatomic Pathology Operations Coordinator to lead and improve laboratory operations.
Join Deel as a Director of Mobility Operations and drive scalable growth in global mobility services with innovative strategies.
Work with Drive Shack as a Facilities Technician and ensure our venue remains in top condition for a unique entertainment experience.
Take charge of your career as a General Manager, where you can learn to operate a multi-million dollar business with the potential for ownership.
Seeking a dynamic Leasing Consultant to join our team in Tallahassee, Florida to drive apartment leasing and enrich resident relationships.
Join Presbyterian Healthcare Services as an RN in Case Management to enhance patient care in Albuquerque through effective utilization review.
Join Humana as a Market Leadership Advisor and help shape the future of healthcare delivery through strategic leadership.
We are seeking a detail-oriented Machine Wear Parts Inspector to join Quinn Company and ensure optimum product performance for our customers.
Subscribe to Rise newsletter